Trend Mortise and Tenon Jig

Enables mortise & tenons and dowel joints to be cut with a router.

• Ideal for cabinet, chair and table.
• CNC precision manufactured plates and body.
• One set-up for both mortise and tenon giving perfectly fitting joints.
• Fully adjustable for compound angle joints up to 45° degree.
• Reversible templates to produce round and square end tenons.
• Templates can be used for accurate dowelling applications.
• Cuts mortise & tenon sizes of 1/4" inch (6.35mm) to 5/8" inch (15.9mm).
• Guide bushes are included but cutters are required.
• A Unibase may be required for certain makes & models of router.
• All tenons are cut with a 5/8 inch diameter straight cutter (Ref. C026).
• The width of the tenon is adjusted by using different guide bush diameters.
• International PCT Appl No. PCT/GB02/00253.

Specifications:

• Material thickness min. - 12mm
• Material thickness max. - 47mm
• Tenon thickness min. - 4.8mm
• Tenon thickness max. - 16mm
• Tenon width max. - using vertical guide+ 90mm
• Mortise length max. - using vertical guide++ 90mm
• Angle tilt compound - (minus)-10 degree to 45 degrees
• + on end of 100mm wide material.
• ++unlimited if vertical guide removed and wood repositioned.

Includes:

• 5 x Plastic guide bushes 15.9mm, 22.2mm, 28.6mm, 30.2mm & 31.8mm
• 1 x Metal guide bush 25.4mm
• 4 x Clamps
• 1 x Guide bush collar
• 1 x Set-up Bar