Features:

• The tool is unique as it combines a powerful impact driver and collated autofeed driver in one
• The tool offers distinct advantages over other impact drivers and collated autofeed tools.
• A large part of the cost of any power tool is the batteries and the Concept driver is supplied with 2 x 2.4Ah Sanyo NiCd batteries which are far superior to chinese or metal hydride batteries found on many tools
• It also means that builders do not have to go to the expense of additional or replacement batteries as the two batteries alone are enough for most
• As an impact driver alone the 167Nm of power of this tool sets it apart from the rest which are mostly 125Nm to 140Nm.
• The collated autofeed takes 25-50 mm collated screws and will take upto 55mm
• The attachment is easy to operate using a hexagon key to take on and off and set the gauge to length of screws being used, and a simple dial controls countersink management
• The attachment can be set to feed from the top or sides and Concept do not require that the builder use our collated screws unlike other companies
• Concept do however recommend that a quality strip is used so that the tool operates at optimum speed and there is less chance of jamming etc.

Specification:

• 14.4 Volt
• 167 Nm power ( approx 20-25% more than equivalent 14.4V Impact Drivers )
• 2300 RPM / 3000 BPM
• Forward / Reverse
• Electric Brake
• Variable Speed Control
• LED Lights
• 2 x 2.4 Sanyo Ni-Cd batteries
• 1 Hour Intelligent Fast Charger
• Attachment suitable for screws 25, 32,35,38,42,45,50 mm
• Countersink control dial
• Quick and easy to fit and remove attachment
• Rubber end piece for paper protection x 2
• Belt track for stability
• Release button for easy removal of strips
• Autofeed positions screw before driving so less chance of jamming
• Attachment can be fitted to feed from top or side
• 2 x Extended Phillips bits
• Carry Case
• 1 Year warranty
• Weight approx 2.9 Kg
• Product Code: 210020

Alternatives